Elektronisk temperaturregulator for deg som bygger ditt eget Røykeskap / Røykehus.
Hull for montering 71 x 29mm.
Termostat med probe med lang ledning som du kan føre inn i skapet.
Manual WH1442 Thermostat Product.
Terminals 1 and 2: Normally opened contact of relay
Terminals 3 and 4: Connect the power 220V
Terminals 5 and 6:Temperature connection sensor
_ Electrical performance:
Temperature measurement range: -50 _ ~ 110 _
Temperature control range: -50 _ ~ 110 _
Temperature measurement error: ± 0.5 _
Working voltage: 220V
Data storage : Yes
Working temperature: 0 _ ~ 110 _
_ Key Instructions:
1. RST: Press RST key to switch on and off, press the RST key on the
power-off state once to turn on, on the power-on state, press the RST key
for three seconds and hold on, then it will be off.
A: Press the SET key once to enter the temperature control setting, press
▲ or ▼ button to adjust, press ▲ or ▼ button for three seconds and hold
to enter the fast adjusting mode, press the SET key again to exit setting
B: Press and hold SET key for three seconds to enter the system menu
settings, press the ▲ or ▼ key to select the adjustment menu, press SET
key once to enter the appropriate parameter settings, press ▲ or ▼ to
adjust the parameters needed to be modified, after being adjusted, press
the RST key to exit, or exit as the system delay for 5 seconds.
▲: Up key
▼: Down key
LED Status Description:
The WORK lights at the left side of the screen is used as working indicator
lights, flashing is to indicate the delay of cooling or heating, if the LED is
always on ,it indicates it is on the status of cooling or heating .
The SET light at the left side of the screen lights is used as setting indicator
lights, if the LED is always on ,it indicates it is on the status of setting.